Engineering and MethodsBosaso
How do rebar bending experience gaps affect Bosaso builds?
Rebar bending experience gaps in Bosaso show up as wrong bar geometry. Check a sample of cut and bent bars against the bar bending schedule first.
Insights
Analysis, method and practical guidance for building across Somaliland and Puntland: what the evidence supports, what it costs on site, and what to do differently tomorrow.
1149 articlesshowing 553 to 576
Insights
Engineering and MethodsGabiley
How do concrete transport experience gaps affect Gabiley?
Limited concrete transport experience in Gabiley can let mixes segregate before placement. Learn how to check trucks, chutes and records.
Business and CostsBosaso
How do design queries stall a build in Bosaso?
Design queries skills gaps in Bosaso leave site instructions unresolved. Written queries, dated registers and one decision-maker close the loop.
Infrastructure and ServicesBorama
Why do paving block bids come in low in Borama?
Low paving block bids in Borama often omit bedding, edge restraint and drainage. Here is how to find the gaps before you sign.
Business and CostsBerbera
How do you check material substitution claims in Berbera?
A material substitution in Berbera cannot rest on a claim. Ask for batch certificates, test records, a retained sample and written approval before installation.
Business and CostsGarowe
How do you check transport allowance claims in Garowe?
A transport allowance in a Garowe bid is only as good as the evidence behind it. Ask for vehicle records, fuel logs and delivery notes before you trust it.
Business and CostsBorama
How do you assess supervision workload in Borama?
A supervisor stretched across too many Borama sites visits less and signs more. Check the workload before work starts.
Infrastructure and ServicesBerbera
How do you supervise a generator changeover in Berbera?
Weak supervision on generator changeover in Berbera lets unsafe power transfer pass unrecorded. Supervise the sequence, test the interlocks, keep records.
Infrastructure and ServicesBerbera
Why do rainwater pipe sizing bids run low in Berbera?
Low rainwater pipe sizing bids in Berbera often hide omitted downpipes, undersized gutters and no allowance for overflow during heavy rainfall.
Engineering and MethodsBorama
Why do roof insulation bids come in low in Borama?
Low roof insulation bids in Borama often omit edge, parapet and penetration work. Check the scope line by line before you compare prices.
Engineering and MethodsHargeisa
How do aggregate grading training gaps affect Hargeisa?
Aggregate grading training gaps in Hargeisa let a certificate stand in for tested skill, so mix consistency depends on the supervisor, not the classroom.
Ground and FoundationsBosaso
How do you check excavation support training in Bosaso?
Attendance records do not prove a crew can shore a trench. Ask for logged assessments, tool checks and a supervised dig before work starts in Bosaso.
Engineering and MethodsHargeisa
How do you check floor screeding in Hargeisa?
Floor screeding skills gaps in Hargeisa show up as hollow spots, curling edges and uneven finished levels. Check the mix, the thickness and the levels.
MaterialsGarowe
How do you check clerk of works skills in Garowe?
Ask any clerk of works in Garowe to read a beam drawing out loud to the steel fixer before the bars are tied, and watch what happens.
Engineering and MethodsGarowe
How does cantilever construction go wrong in Garowe?
Supervision gaps in cantilever construction let deflection and cracking start at the support, so check hold points, records and early warning signs.
Why does water addition training in Burao fail to stop extra water?
Water addition training in Burao can stop at attendance. Check who was assessed at the mixer, because unsupervised extra water raises the water-cement ratio.
Ground and FoundationsGarowe
How do you check backfill compaction in Garowe?
Backfill compaction in Garowe fails when nobody tests it: how to check records, watch a layer being placed, and close the skills gap.
Infrastructure and ServicesHargeisa
Why do rainwater pipes overflow in Hargeisa?
A rainwater pipe overflows when sizing ignores rainfall rate, roof area and outlets. Check the numbers, the fixings and the overflow path.
Business and CostsQardho
How do you check site numeracy claims in Qardho?
Site numeracy competency risks in Qardho are evidence gaps: check setting-out sheets, mix ratios and bar bending schedules against the drawing.
Ground and FoundationsBosaso
How do you check footing setting out experience in Bosaso?
Footing setting out in Bosaso can go wrong when the crew has never run that operation, so check method statements, records and as-built positions.
Business and CostsHargeisa
How do supplier credit gaps delay Hargeisa builds?
A gap in supplier credit control on a Hargeisa build shows up as stopped deliveries. Ask for written statements and delivery records.
How do you check roof insulation skills in Burao?
Check roof insulation skills in Burao by asking for the layer order, the fixing method and how the crew stops heat crossing the rafters.
Business and CostsBorama
Who checks retaining walls on a Borama build?
Retaining walls fail when nobody checks drainage, backfill and lateral loads. Here is how supervision gaps in Borama show up and how to close them.
Engineering and MethodsQardho
How do you check cantilever construction competency in Qardho?
Cantilever competency in Qardho is proven by records and a sample pour, not by claims. Ask for deflection readings, mix records and steel fixing evidence.
